Illustrative previewBuild-to-order Odoo module for apparel:
matrix BOMs, cut-make-trim routing, fabric roll/lot tracking, and style cost sheets.
What is Textile & Apparel Manufacturing Suite?
Build-to-order Odoo module for apparel: matrix BOMs, cut-make-trim routing, fabric roll/lot tracking, and style cost sheets. Built to order by ECOSIRE for Odoo 17, 18, 19 — indicative price from $999.00 USD; request a quote for a scoped proposal.
Key Features
Built to order, done for you
No DIY setup — a working app, built, installed and supported by ECOSIRE.
- 1
You order
Start with a one-time build price. We scope it with you at kickoff.
- 2
We build & install
ECOSIRE builds, configures and installs it on your Odoo.
- 3
Go live + support
You go live in about one working week, with two weeks of go-live support. Defects in the code we deliver are fixed free of charge.
Technical Specifications
- Odoo Compatibility
- Odoo 17, Odoo 18, Odoo 19
- Editions
- Enterprise & Community
- License
- Licence confirmation required
- Python Requirement
- Python 3.10+
- Database
- PostgreSQL 12+
About this Product
The Textile & Apparel Manufacturing Suite is a build-to-order Odoo module that ECOSIRE designs, builds, installs, and supports for your factory — not a pre-packaged apps.odoo.com download. Odoo's core Manufacturing (MRP) app was built for discrete assembly; it struggles the moment you run a real garment line where a single style explodes into dozens of size/color SKUs, each needing its own cut ratio, fabric consumption, and trims. This suite fills that gap directly inside your Odoo database.
At its core we extend Odoo's product variant engine (product.template / product.attribute / product.attribute.value) so a style like "Crew Tee SS26" generates a full size-by-color matrix, and we introduce matrix BOMs — a custom model (models.Model) layered on mrp.bom that resolves fabric, thread, labels, and trims per variant using computed fields (@api.depends) for per-size fabric consumption and cutting ratios. No more maintaining 40 near-identical BOMs by hand.
Production is modeled as a true cut-make-trim (CMT) flow. We configure mrp.routing / mrp.workcenter for Cutting, Stitching, and Finishing work centers, with operation-level work orders, standard minutes, and cost rates so your floor supervisors clock real progress and you get accurate WIP and labor costing. Fabric is tracked as rolls and dye lots using Odoo lot/serial tracking (stock.lot) with custom fields for width, GSM, dye-lot, and shade band — so cutting draws from the correct roll and shade continuity is enforced across a marker.
Cost-sheet management gives merchandisers a pre-production costed BOM per style/season: fabric + trims + CMT + overhead + margin, rendered as a QWeb PDF cost sheet you can send to buyers. Wastage and shrinkage are first-class: we add configurable cutting-wastage percentages and shrinkage allowances into the consumption compute so planned vs. actual variance is visible per work order and per roll, feeding real yield reporting instead of guesswork.
Everything ships with proper security (ir.model.access.csv access rights plus record rules for multi-company / per-warehouse isolation), backend list/form/kanban views (XML) with OWL components where interactivity helps (the size-color matrix grid), automated actions for low-stock roll alerts and lot-shade flagging, and clean XML-RPC / JSON-RPC endpoints so your PLM, cutting-room software, or e-commerce channel can read styles and post production. It targets Odoo 17, 18, and 19 and works on Community or Enterprise — we confirm your edition and pin the exact minor version during scoping. Because it's build-to-order, we tailor the matrix attributes, routing, cost-sheet layout, and integrations to how YOUR factory actually cuts and sews, then hand over documented, upgrade-safe code your team owns.
What you get
- Complete, documented Odoo module (installable addon with __manifest__.py, models, views, security, reports) pinned to your Odoo 17/18/19 minor version and Community/Enterprise edition
- Configured size-color attribute sets, matrix BOM templates, and CMT routing/work centers matched to your actual product ranges and floor layout
- QWeb cost-sheet and production report templates styled to your factory's branding and buyer requirements
- ir.model.access.csv access rights and record rules mapped to your real roles (merchandising, cutting room, production, costing, admin)
- Data import and initial setup: styles, fabric rolls/lots, work centers, and standard costs loaded into your database
- XML-RPC / JSON-RPC integration hooks configured for your PLM, cutting-room, or e-commerce systems where in scope
- Technical documentation plus an admin/end-user guide covering the matrix workflow, roll consumption, and cost sheets
- Live training sessions for merchandisers, cutting-room, and production supervisors, with recordings
Who this is for
Apparel Manufacturer / Factory Owner
Runs a garment factory producing variant-heavy styles across sizes and colors. Needs accurate per-style costing, real fabric yield, and CMT progress visibility without drowning in duplicate BOMs.
Merchandiser / Product Developer
Builds styles by season, negotiates buyer prices, and lives in cost sheets. Wants a single place to model fabric, trims, and CMT cost per style and export a clean costed BOM for buyer sign-off.
Cutting-Room & Production Manager
Manages rolls, dye lots, cutting ratios, and the stitching/finishing floor. Needs shade continuity, roll-level consumption, wastage/shrinkage control, and work-order tracking across cut, make, and trim.
Textile Mill / Vertical Operation Ops Lead
Oversees a mill or vertically integrated operation where fabric and garment stages share one Odoo database. Needs lot/roll traceability from greige to finished garment and consolidated yield reporting.
How Textile & Apparel Manufacturing Suite Compares
| Criterion | ECOSIRE | Custom Build | Competitor | Odoo Native |
|---|---|---|---|---|
| Size-color matrix BOMs (fabric/trims resolved per variant) | Purpose-built matrix BOM model with per-variant compute | Possible but you design and maintain the data model yourself | Rarely covers full matrix; often flat per-SKU BOMs | Not included |
| Cut-make-trim routing (cutting/stitching/finishing work orders) | Configured CMT routing with operation costing tailored to your floor | Buildable, but routing logic is on you to define and test | Generic MRP routing, not apparel-specific | Partial support |
| Fabric roll and dye-lot consumption with shade continuity | stock.lot extended with roll width/GSM/dye-lot + shade enforcement | Requires custom lot fields and rules you develop and support | Basic lot tracking; shade continuity usually absent | Partial support |
| Wastage & shrinkage in material planning | Configurable wastage/shrinkage folded into consumption compute | Must be coded and validated per your rules | Seldom modeled beyond flat scrap % | Not included |
| Style/season cost-sheet with QWeb PDF for buyers | Branded cost-sheet builder and PDF report included | Report design and cost logic built from scratch | Limited or add-on; rarely apparel cost-sheet format | Not included |
| Tailored to your exact workflow & Odoo version/edition | Scoped and pinned to your 17/18/19 Community or Enterprise setup | Fully tailored but full build cost and risk fall on you | One-size-fits-all; you adapt to it | Not included |
| Ownership, documentation & support window | Source code, docs, training, and SLA support window delivered | Depends entirely on your in-house team and turnover | Vendor-locked; support quality varies | Partial support |
| Delivery model | Build-to-order, installed by ECOSIRE in one working week | Long in-house project timeline and staffing | Instant download but generic and often unsupported | Already in Odoo but lacks apparel features |
Frequently Asked Questions about Textile & Apparel Manufacturing Suite
Is this an instant download I can install myself right now?
No. This is a build-to-order module that ECOSIRE designs, builds, configures, and installs specifically for your factory. It is not an existing apps.odoo.com download. After purchase we scope your product ranges, routing, and cost-sheet needs, then build and deploy the tailored module into your Odoo instance.
What is the delivery lead time?
Typical lead time is one working week from the completion of scoping, depending on how many variant/attribute sets, integrations, and custom reports are involved. We start with a short discovery to confirm your Odoo version and edition, lock the scope, and give you a firm delivery date. Complex integrations (PLM, cutting-room software) may extend the timeline, which we agree up front.
What support and updates do I get after go-live?
Every build includes a post-go-live support and bug-fix window with a defined SLA for issues in the delivered scope. Beyond that we offer paid maintenance plans covering enhancements, new styles/seasons, and version upgrades to keep the module compatible as you move across Odoo 17, 18, and 19. Because you receive the source code, your own team can also maintain it.
Which Odoo versions and editions does it support?
We support Odoo 17, 18, and 19 on both Community and Enterprise. We confirm your exact edition and minor version during scoping and pin the build to it. Note that some deeper MRP/quality features exist only in Enterprise; where a capability depends on Enterprise we flag it, and we can implement a Community-friendly alternative when needed.
How does it handle variant-heavy styles without creating hundreds of BOMs manually?
We extend Odoo's product.attribute engine so one style generates the full size-color matrix, and layer matrix BOMs on mrp.bom that resolve fabric, trims, and thread per variant using computed fields (@api.depends). Per-size fabric consumption and cutting ratios are calculated automatically, so you maintain one style definition instead of dozens of near-identical BOMs.
Can it track fabric rolls, dye lots, and wastage accurately?
Yes. Fabric is tracked using Odoo's lot/serial system (stock.lot) extended with width, GSM, dye-lot, and shade-band fields, so cutting draws from the correct roll and shade continuity is enforced. Configurable cutting-wastage and shrinkage allowances feed the consumption compute, giving you planned-vs-actual yield variance per roll, work order, and style.
Will it survive Odoo upgrades and can we integrate our other systems?
We build upgrade-safe, source-controlled code following Odoo conventions (proper manifest, models, security, no core hacks), so upgrades are far cleaner than ad-hoc customizations. For integrations we expose and consume standard XML-RPC / JSON-RPC endpoints to sync styles, BOMs, and production data with your PLM, cutting-room software, or e-commerce channels.
Related Modules
Supplier Quality & Incoming PPAP/FAI
Build-to-order Odoo supplier quality: PPAP/FAI submissions, incoming inspection, vendor scorecards & SCAR. Built and installed by ECOSIRE.
Tooling, Dies & Mold Management
Build-to-order Odoo module to track tools, dies, molds & fixtures by shot-count life, maintenance & custody — prevent line stoppages.
Tour & Tour-Package Management
Build, price and book tour packages in Odoo — itineraries, sub-bookings, per-pax pricing and auto agent commissions.
Textile & Apparel Manufacturing Suite
Build-to-order Odoo module for apparel: matrix BOMs, cut-make-trim routing, fabric roll/lot tracking, and style cost sheets.
- Size/color matrix variant generation on top of Odoo product.attribute — one style spawns the full size-by-color SKU grid without manual variant entry
- Matrix BOMs extending mrp.bom that resolve fabric, thread, trims, and labels per variant, with computed per-size fabric consumption via @api.depends
- Cut-make-trim routing across Cutting, Stitching, and Finishing work centers (mrp.routing / mrp.workcenter) with operation-level work orders and standard minutes
- Fabric roll and dye-lot tracking using Odoo stock.lot, extended with width, GSM, dye-lot, and shade-band fields so cutting draws from the right roll