Ürün ayrıntıları İngilizce olarak görüntülenir. Çeviriler yakında gelecek.
Kısa bilgiler
- Fiyat
- $499.00 USD
- dynamics_365_business_central versiyonları
- —
- Kurulum süresi
- 30 dk.
- Lisans
- Bir kerelik kalıcı
- Diller
- 11 language
Tek Seferlik Satın Alma
Tooling & Calibration Management
A custom-built Business Central extension that registers every tool, gauge, and fixture, drives calibration schedules with job-queue alerts, stores certificates, and blocks out-of-cal equipment from production. Built, installed per-tenant, and supported by ECOSIRE.
$499.00USD
Şimdi ödeme yok. Bu, ekibimize bir teklif talebi gönderir — fiyat ve sonraki adımlarla e-posta ile dönüş yapacağız.
Temel Özellikler
Dedicated tool, gauge, and fixture register built as AL tables with Card and List pages — asset number, type, manufacturer, serial, custodian, current location, and lifecycle status
Calibration schedule per asset with interval, last-calibrated date, and a FlowField/calculated next-due date
Daily job-queue routine that flags due and overdue calibrations and raises notifications to the responsible quality user
Calibration certificate and measurement-report storage via BC's native document attachment / incoming-document framework, kept against the asset of record
Out-of-calibration guard: event subscribers that warn or block when a production, quality, or output order references an asset past its calibration date
Tool-life and usage tracking that accumulates cycles, hours, or measurements against each asset for replacement and recalibration planning
Check-in / check-out workflow for shared tooling with custodian, location, and timestamped ledger entries
Calibration history ledger giving a full audit trail of every recalibration event, result, and certificate per asset
Configurable calibration status workflow (in-cal, due-soon, out-of-cal, quarantined, scrapped) with role-based transitions
OData v4 / REST API endpoints exposing the tooling and calibration data for Power BI dashboards, Power Apps, and Dataverse sync
Dedicated permission sets so only authorized roles can recalibrate, release, quarantine, or scrap tooling
Role Center cues and a calibration-due list page surfacing overdue and upcoming items at login
Tool location and movement reporting for shop-floor traceability across cells, cribs, and inspection rooms
Built as a per-tenant extension so it upgrades alongside your Business Central environment without blocking Microsoft updates
Bu Ürün Hakkında
Tooling & Calibration Management is a build-to-order extension for Microsoft Dynamics 365 Business Central, engineered by ECOSIRE for precision manufacturers who must prove that every measurement was taken with in-calibration equipment.
Neden Tooling & Calibration Management
Dedicated tool, gauge, and fixture register built as AL tables with Card and List pages — asset number, type, manufacturer, serial, custodian, current location, and lifecycle status
Calibration schedule per asset with interval, last-calibrated date, and a FlowField/calculated next-due date
Daily job-queue routine that flags due and overdue calibrations and raises notifications to the responsible quality user
Calibration certificate and measurement-report storage via BC's native document attachment / incoming-document framework, kept against the asset of record
Out-of-calibration guard: event subscribers that warn or block when a production, quality, or output order references an asset past its calibration date
Tool-life and usage tracking that accumulates cycles, hours, or measurements against each asset for replacement and recalibration planning
This is not an instant AppSource download. ECOSIRE builds the extension to your processes, installs it as a per-tenant extension on your Business Central environment (cloud or on-prem), and supports it after go-live.
At its core is a dedicated tooling register implemented as new AL tables and Card/List pages: every tool, gauge, and fixture carries an asset number, type, manufacturer, serial, current location, custodian, and status. Calibration is modelled as a recurring schedule — each asset has an interval, a last-calibrated date, and a calculated next-due date. A scheduled job queue entry evaluates due and overdue items daily and raises alerts so nothing slips past its window.
Calibration certificates and measurement reports are attached using BC's native document attachment / incoming-document framework, so the certificate of record lives beside the asset. Tool-life and usage are accumulated against each asset, and shared tooling moves through a check-in / check-out flow that records who holds what and where.
Because it is real AL, it integrates cleanly: event subscribers can warn or block when a production or quality order references an asset that is out of calibration; the OData/REST API exposes the register for Power BI, Power Apps, or Dataverse; and permission sets scope who can recalibrate, scrap, or release tooling.
ECOSIRE handles requirements, AL development, data migration of your existing tool list, UAT, installation, and post-go-live support — a complete, owned, audit-ready solution rather than a spreadsheet bolted to your ERP.
Ne elde edeceksin
- Custom AL per-tenant extension (.app) built to your specifications and installed on your Business Central environment
- Tool/gauge/fixture register with calibration schedule, certificate storage, tool-life tracking, and check-in/check-out, configured to your processes
- Job-queue setup for automated daily calibration due/overdue evaluation and alerts
- Dedicated permission sets and Role Center cues assigned to your quality and tooling roles
- One-time migration of your existing tool and gauge list (from spreadsheet or legacy system) into the new register
- OData/REST endpoints enabled and documented for Power BI / Power Platform / Dataverse integration
- UAT support, deployment to production, admin handover documentation, and a post-go-live support window
Bu kimin için
Quality / Calibration Manager
Owns the calibration program and must prove to auditors (ISO 9001, IATF 16949, AS9100) that every gauge was in-cal when used. Needs due-date control, certificate storage, and a clean audit trail rather than a fragile spreadsheet.
Tooling / Tool Crib Supervisor
Manages shared fixtures and tools across cells. Needs to know who has what, where it is, and how much life is left, with a controlled check-in/check-out instead of a sign-out sheet.
Manufacturing Operations Manager
Wants production to be physically prevented from using out-of-calibration equipment, with the controls living inside Business Central next to production and quality orders, not in a disconnected app.
Kuruluma genel bakış
ECOSIRE'dan indirin
Lisansı ecosire.com adresinden satın alın ve hesap kontrol panelinizden Tooling & Calibration Management modülünün ZIP dosyasını indirin.
Odoo'ya yükle
ZIP'i sunucudaki Odoo özel eklentiler klasörünüze çıkarın (veya Uygulamalar > Odoo.sh / runbot'taki dosyadan yükle yoluyla yükleyin).
Modülü yükleyin
Geliştirici Modunu etkinleştirin, Uygulamalar'ı açın, Uygulama Listesini Güncelle'ye tıklayın, Tooling & Calibration Management'i arayın ve Yükle'ye basın.
Ayarları yapılandırın
Yeni menüyü açın, ECOSIRE lisans anahtarınızı yapıştırın, tüm harici kimlik bilgilerini (Shopify, Amazon, Stripe vb.) bağlayın ve kaydedin.
Doğrulayın ve yayına alın
Yerleşik bağlantı testini çalıştırın, ilk 10 kaydınızı senkronize edin ve yinelenen cronu planlayın. Herhangi bir sorun olursa desteğe başvurun.
Tooling & Calibration Management Nasıl Karşılaştırılır
| Kriter | ECOSIRE | Özel Yapı | Rakip | Odoo Yerlisi |
|---|---|---|---|---|
| Tool/gauge/fixture register native to Business Central | ||||
| Automated calibration due/overdue alerts via job queue | ||||
| Blocks out-of-calibration equipment on production/quality orders | ||||
| Built, installed, and supported for you (no in-house AL team needed) | ||||
| Tailored to your exact calibration rules and status workflow | ||||
| One-time fixed price with defined delivery lead time | ||||
| OData/REST exposure for Power BI and Power Platform | ||||
| Upgrade-safe per-tenant extension that survives BC updates |
Tooling & Calibration Management hakkında Sıkça Sorulan Sorular
+How long does it take to receive and go live with the extension?
Because this is build-to-order, there is a delivery lead time — it is not an instant download. A typical engagement runs about 3 to 5 weeks from signed requirements: discovery and design, AL development, migration of your existing tool list, UAT, and production install as a per-tenant extension. The exact timeline depends on how many custom calibration rules, integrations, and status workflows you need; ECOSIRE confirms it in the scoping call.
+Is this on Microsoft AppSource, and how is it installed?
No — it is delivered as a per-tenant extension (a custom .app) that ECOSIRE builds and installs directly onto your Business Central environment, cloud or on-premises. It is not a public AppSource listing. This keeps the solution tailored to your processes while still upgrading cleanly alongside Microsoft's Business Central updates.
+What ongoing support and updates are included after go-live?
Every build includes a post-go-live support window for defect fixes and questions. Because it is a real AL extension, ECOSIRE keeps it compatible with future Business Central major releases and can extend it — new calibration rules, additional integrations, more reports — under a support or change-request agreement. You own the deployed extension on your tenant.
+Will it actually stop production from using an out-of-calibration gauge?
Yes — that guard is implemented with AL event subscribers on the relevant production, output, or quality documents. When an order references an asset whose calibration date has passed, the extension can warn the user or hard-block the action, based on the policy you choose during scoping. The control lives inside Business Central, not in a separate system.
+Can the calibration data feed Power BI or the Power Platform?
Yes. The tooling and calibration tables are exposed through Business Central's OData v4 / REST API, so you can build Power BI dashboards (calibration-due trends, overdue counts, asset utilization), drive Power Apps, or sync to Dataverse. ECOSIRE enables and documents the endpoints as part of the delivery.
Müşteriler ECOSIRE'a Neden Güveniyor?
SOC 2 Hizalanmış
GDPR Uyumlu
Güvenli Şerit Ödemesi
30 Günlük Para İadesi
Ömür Boyu Güncellemeler
LGPL-3.0 Lisansı
İlgili Modüller
Teklif isteyin
Tooling & Calibration Management
A custom-built Business Central extension that registers every tool, gauge, and fixture, drives calibration schedules with job-queue alerts, stores certificates, and blocks out-of-cal equipment from production. Built, installed per-tenant, and supported by ECOSIRE.
- Dedicated tool, gauge, and fixture register built as AL tables with Card and List pages — asset number, type, manufacturer, serial, custodian, current location, and lifecycle status
- Calibration schedule per asset with interval, last-calibrated date, and a FlowField/calculated next-due date
- Daily job-queue routine that flags due and overdue calibrations and raises notifications to the responsible quality user
- Calibration certificate and measurement-report storage via BC's native document attachment / incoming-document framework, kept against the asset of record