产品详细信息以英文显示。翻译即将推出。
速览
- 价格
- $99.00 USD
- woocommerce 版本
- —
- 设置时间
- 30分钟
- 许可证
- 一次永久
- 语言
- 11 语言
一次性购买
WooCommerce Shipment & Order Tracking
A custom-built WooCommerce plugin that auto-detects carriers across 900+ couriers, gives customers a branded self-service tracking page, and sends proactive email/SMS delivery notifications — built, installed, and supported on your WordPress site by ECOSIRE.
$99.00USD
现在无需付款。此操作会向我们的团队发送报价请求——我们会通过邮件跟进价格和后续步骤。
核心功能
Automatic carrier detection from the tracking number's format and checksum, with manual override per shipment when a number is ambiguous
Branded customer tracking page rendered inside your active theme via shortcode + Gutenberg block — no redirect to a third-party tracking domain
Email and SMS notifications across seven shipment states (label created, in transit, out for delivery, delivered, exception, returned, pending)
Estimated delivery date display, derived from carrier ETA where available with a configurable transit-time fallback per shipping method
Coverage for 900+ carriers via a pluggable provider layer (direct carrier APIs and/or an aggregator key you supply)
Full HPOS / custom order tables compatibility — tracking data and meta read and written through the WooCommerce CRUD layer, not raw post meta
WooCommerce REST API endpoints to attach, update, and read tracking numbers so your 3PL or WMS can push fulfillment programmatically
Per-shipment support for split and partial fulfillments — multiple tracking numbers and carriers on a single order
Scheduled status polling via WP-Cron (or a hardened system cron we configure) with exponential backoff on carrier rate limits
Customizable transactional email templates that inherit your WooCommerce email header, footer, and branding
Tracking timeline shown on the customer's My Account order-view page and in order confirmation emails
WPML / Polylang and multisite ready — notification copy and the tracking page localize per the customer's order language
Admin tracking dashboard inside wp-admin: bulk add tracking, filter by state, and re-poll stuck shipments
Webhook + action hooks (e.g. on the 'delivered' and 'exception' transitions) so you can trigger review requests, refunds, or ticket creation
SMS via your own provider account (Twilio, Vonage, or a regional gateway) — you control sender ID and per-message cost
关于此产品
WISMO ("Where is my order?") tickets are the single largest avoidable load on most WooCommerce support inboxes. This plugin removes the reason customers email you in the first place: it turns every order into a self-service, branded tracking experience that updates automatically.
为什么选择 WooCommerce Shipment & Order Tracking
Automatic carrier detection from the tracking number's format and checksum, with manual override per shipment when a number is ambiguous
Branded customer tracking page rendered inside your active theme via shortcode + Gutenberg block — no redirect to a third-party tracking domain
Email and SMS notifications across seven shipment states (label created, in transit, out for delivery, delivered, exception, returned, pending)
Estimated delivery date display, derived from carrier ETA where available with a configurable transit-time fallback per shipping method
Coverage for 900+ carriers via a pluggable provider layer (direct carrier APIs and/or an aggregator key you supply)
Full HPOS / custom order tables compatibility — tracking data and meta read and written through the WooCommerce CRUD layer, not raw post meta
When a fulfillment number is added to an order — manually in wp-admin, via the WooCommerce REST API, or pushed by your 3PL — the plugin auto-detects the carrier from the tracking number pattern and begins polling that courier across 900+ supported carriers. A scheduled WP-Cron job (or a real system cron, which we configure for reliability) refreshes shipment status and writes each checkpoint to a custom tracking table keyed to the order.
Customers get a branded tracking page rendered from your theme — no off-domain redirect to a third-party tracking site. As the shipment moves through seven states (label created, in transit, out for delivery, delivered, exception, returned, pending), the plugin fires transactional email and optional SMS notifications and shows an estimated delivery date.
Everything is wired into native WooCommerce: it respects HPOS (High-Performance Order Storage / custom order tables), hooks order status transitions via standard WordPress actions and filters, and exposes a [woo_tracking] shortcode plus a block for placement on the My Account / order-view templates.
This is not an instant marketplace download. ECOSIRE builds, installs, and configures the plugin directly on your WordPress site, connects it to your carrier accounts and SMS provider, matches the tracking page to your theme, and supports it after launch. You get a working system on your store — not a generic ZIP you have to integrate yourself. Honest lead time and ongoing support terms are below.
你得到什么
- The fully built plugin installed and activated on your WordPress / WooCommerce site (staging first, then production)
- Carrier integration configured against your accounts or your aggregator API key, with auto-detection tuned to the couriers you actually ship with
- Branded tracking page and Gutenberg block styled to match your theme, placed on My Account and order-view templates
- Seven-state email templates wired into WooCommerce mailer plus SMS provider connected to your account
- WP-Cron / system cron polling schedule configured and verified, including rate-limit handling
- WooCommerce REST API endpoints documented for your 3PL / WMS to push tracking numbers programmatically
- HPOS compatibility verified and a short admin runbook (adding tracking, re-polling, reading the dashboard) plus handover walkthrough
这是给谁的
DTC store drowning in WISMO tickets
A direct-to-consumer WooCommerce store where support spends hours each week answering 'where is my order?'. Proactive notifications and a self-service tracking page cut those tickets at the source and free the team for real issues.
Multi-carrier / cross-border merchant
A store shipping via several couriers — domestic and international — that needs one unified tracking view. Auto-detection across 900+ carriers and per-order multi-tracking handle split shipments and mixed-carrier fulfillment without staff guessing which courier a number belongs to.
3PL-integrated brand on HPOS
A scaling brand on High-Performance Order Storage whose 3PL or WMS pushes fulfillment data via API. They need tracking attached programmatically through the WooCommerce REST API and surfaced to customers automatically, with no manual data entry.
安装概述
从ECOSIRE下载
在 ecosire.com 上购买许可证并从您的帐户仪表板下载 WooCommerce Shipment & Order Tracking 模块 ZIP。
上传至Odoo
将 ZIP 解压到服务器上的 Odoo 自定义插件文件夹中（或通过“应用程序”>“从 Odoo.sh / runbot 上的文件安装”上传）。
安装模块
激活开发者模式，打开应用程序，单击更新应用程序列表，搜索 WooCommerce Shipment & Order Tracking，然后按安装。
配置设置
打开新菜单，粘贴您的 ECOSIRE 许可证密钥，连接任何外部凭据（Shopify、Amazon、Stripe 等），然后保存。
验证并上线
运行内置连接测试，同步前 10 条记录，并安排定期 cron。如果出现任何问题，请联系支持人员。
WooCommerce Shipment & Order Tracking 如何比较
| 标准 | 伊科西尔 | 定制建造 | 竞争对手 | 奥杜本机 |
|---|---|---|---|---|
| Automatic carrier detection across 900+ couriers | ||||
| Branded on-site tracking page (no third-party redirect) | ||||
| Proactive email + SMS notifications across 7 shipment states | ||||
| Built, installed & configured on your site by the vendor | ||||
| HPOS / custom order tables compatibility verified for your store | ||||
| WooCommerce REST API push for 3PL / WMS fulfillment | ||||
| Instant self-serve marketplace download | ||||
| Tuned to your specific carriers and theme at build time | ||||
| Ongoing carrier-API maintenance available |
关于WooCommerce Shipment & Order Tracking的常见问题
+Is this an instant download I can install myself?
No. This is a build-to-order engagement. ECOSIRE builds, installs, and configures the plugin directly on your WordPress site, connects it to your carrier and SMS accounts, and matches the tracking page to your theme. You receive a working system on your store, not a generic ZIP to integrate yourself.
+How long does delivery take after I order?
Typical lead time is about 5 to 10 business days from kickoff. Day one is a short scoping call to confirm your carriers, SMS provider, and theme. We then build and configure on a staging copy of your site, get your sign-off, and deploy to production. Heavy customization (many regional carriers, bespoke SMS gateways, or unusual fulfillment flows) can extend this — we give you a firm date after scoping, never a vague promise.
+What about ongoing support and updates after launch?
The one-time build price includes a 30-day post-launch support window covering bug fixes and configuration adjustments. After that, you own the installed plugin and it keeps running. We offer an optional retainer for ongoing carrier-API maintenance (couriers change their endpoints), WooCommerce/WordPress version-compatibility updates, and new feature work. We will quote that separately based on your carrier count and update cadence — no surprise fees baked in.
+Does it work with HPOS (High-Performance Order Storage) and the WooCommerce REST API?
Yes. All tracking data is read and written through the WooCommerce CRUD layer, so it is fully compatible with HPOS / custom order tables — no reliance on legacy post meta. We also expose REST API endpoints so your 3PL, WMS, or fulfillment app can attach and update tracking numbers programmatically rather than someone typing them into wp-admin.
+How does carrier auto-detection actually work, and what if it guesses wrong?
The plugin matches the tracking number against known carrier formats and checksums to pick the most likely courier, then polls that carrier's API. Because some number formats overlap between couriers, every shipment keeps a manual carrier override in wp-admin — one click reassigns it and re-polls. For stores that always ship with a fixed set of carriers, we tune detection to that shortlist during the build to minimize ambiguity.
+Do email and SMS notifications cost extra to run?
Email uses your existing WooCommerce transactional mail setup, so there is no added per-message cost from us. SMS runs through your own provider account — Twilio, Vonage, or a regional gateway — so you control the sender ID and pay your provider's per-message rate directly. We wire it up; you keep ownership of the account and its billing.
为什么客户信任 ECOSIRE
SOC 2 对齐
符合 GDPR
安全条纹支付
30 天退款
终身更新
LGPL-3.0 许可证
相关模块
申请报价
WooCommerce Shipment & Order Tracking
A custom-built WooCommerce plugin that auto-detects carriers across 900+ couriers, gives customers a branded self-service tracking page, and sends proactive email/SMS delivery notifications — built, installed, and supported on your WordPress site by ECOSIRE.
- Automatic carrier detection from the tracking number's format and checksum, with manual override per shipment when a number is ambiguous
- Branded customer tracking page rendered inside your active theme via shortcode + Gutenberg block — no redirect to a third-party tracking domain
- Email and SMS notifications across seven shipment states (label created, in transit, out for delivery, delivered, exception, returned, pending)
- Estimated delivery date display, derived from carrier ETA where available with a configurable transit-time fallback per shipping method