产品详细信息以英文显示。翻译即将推出。
速览
- 价格
- $499.00 USD
- dynamics_365_business_central 版本
- —
- 设置时间
- 45分钟
- 许可证
- 一次永久
- 语言
- 11 语言
一次性购买
Kanban & Lean Replenishment
A build-to-order AL extension that adds pull-based Kanban loops and lean material flow to Business Central, so line-side stock refills on real consumption signals instead of MRP pushes.
$499.00USD
现在无需付款。此操作会向我们的团队发送报价请求——我们会通过邮件跟进价格和后续步骤。
核心功能
Electronic Kanban cards with full lifecycle states (active, in-transit, returned, on-hold) stored in dedicated AL tables
Kanban loop master linking item, supplying supermarket/supplier and consuming line-side bin
Consumption-triggered replenishment via AL event subscribers on item, consumption and bin movement postings
Configurable replenishment source per loop: transfer order, purchase order, or production order
Two-bin and supermarket stocking modelled via table and page extensions on Location and Bin
Line-side / point-of-use stocking locations with trigger-quantity thresholds per bin
Kanban sizing calculator deriving card count and quantity from consumption, lead time and safety factor
Job queue entry for scheduled signal sweeps alongside real-time event-driven triggers
Kanban board page (and role centre cue) showing open signals, overdue cards and loop health
Custom OData/REST API pages exposing loops, cards and signals for MES, scanners and Power Platform
Dedicated permission sets separating Kanban operators from loop administrators
Optional Dataverse/Power Apps surface for shop-floor card-return scanning
关于此产品
Stop pushing inventory the floor doesn't need
为什么选择 Kanban & Lean Replenishment
Electronic Kanban cards with full lifecycle states (active, in-transit, returned, on-hold) stored in dedicated AL tables
Kanban loop master linking item, supplying supermarket/supplier and consuming line-side bin
Consumption-triggered replenishment via AL event subscribers on item, consumption and bin movement postings
Configurable replenishment source per loop: transfer order, purchase order, or production order
Two-bin and supermarket stocking modelled via table and page extensions on Location and Bin
Line-side / point-of-use stocking locations with trigger-quantity thresholds per bin
Business Central's native planning is push-based: the planning worksheet and MRP/MPS engine generate supply from forecasts and reorder policies. That works for procurement, but it floods the production floor with material nobody is consuming yet. Kanban & Lean Replenishment flips the signal — line-side stock refills only when the floor actually pulls it.
ECOSIRE builds this as a per-tenant AL extension installed directly on your Business Central environment (Online or on-prem). It is not an instant AppSource download — we develop it against your item master, locations and bin structure, deploy it as a signed extension, and support it after go-live.
What it does
The extension introduces a Kanban loop master record linking a stocked item to a supplying location (supermarket or supplier) and a consuming line-side bin. Each loop owns a number of electronic Kanban cards sized by your demand and lead time. When consumption is posted — via item journal, consumption journal, or a point-of-use scan — an event subscriber detects the bin drop below its trigger and raises a replenishment signal: a transfer order, purchase order, or production order depending on the loop's replenishment source.
Two-bin and supermarket stocking are modelled natively with table and page extensions on Location and Bin, plus a new Kanban Loop, Kanban Card, and Kanban Signal table set. A Kanban sizing calculator computes card count and quantity from average consumption, replenishment lead time and a safety factor, so loops stay right-sized as demand shifts.
Signals are driven by a job queue entry for time-based sweeps and by real-time event subscribers for consumption postings. Everything is exposed through the BC OData/REST API and custom API pages so MES, scanners, or Power Platform flows can read loop status and confirm card returns.
Honest scope: this is a focused lean-execution layer. It complements — not replaces — BC manufacturing and planning.
你得到什么
- Signed per-tenant AL extension (.app) installed on your Business Central environment
- Kanban Loop, Kanban Card and Kanban Signal tables plus Location/Bin table and page extensions
- Kanban board page, sizing calculator page and role-centre cues wired into the manufacturing role
- Event subscribers and job queue setup for consumption-triggered and scheduled replenishment
- Custom API pages and OData endpoints documented for MES/scanner/Power Platform integration
- Permission sets for Kanban operators and administrators, plus configuration of your initial loops
- Deployment to sandbox for UAT then promotion to production, with data validation against your items
- Handover documentation, admin walkthrough session, and source ownership terms
这是给谁的
Lean / Production Manager
Runs pull-based replenishment on the floor and wants line-side stock to refill on real consumption signals instead of MRP pushes, with right-sized Kanban loops they can tune.
Materials / Supply Chain Lead
Manages supermarkets, two-bin systems and transfer flows; needs visibility of open signals, overdue cards and which loops are over- or under-sized.
Business Central Administrator
Owns the BC environment and needs a properly governed per-tenant extension with permission sets, job queue entries and clean API surfaces rather than ad-hoc customisations.
安装概述
从ECOSIRE下载
在 ecosire.com 上购买许可证并从您的帐户仪表板下载 Kanban & Lean Replenishment 模块 ZIP。
上传至Odoo
将 ZIP 解压到服务器上的 Odoo 自定义插件文件夹中（或通过“应用程序”>“从 Odoo.sh / runbot 上的文件安装”上传）。
安装模块
激活开发者模式，打开应用程序，单击更新应用程序列表，搜索 Kanban & Lean Replenishment，然后按安装。
配置设置
打开新菜单，粘贴您的 ECOSIRE 许可证密钥，连接任何外部凭据（Shopify、Amazon、Stripe 等），然后保存。
验证并上线
运行内置连接测试，同步前 10 条记录，并安排定期 cron。如果出现任何问题，请联系支持人员。
Kanban & Lean Replenishment 如何比较
| 标准 | 伊科西尔 | 定制建造 | 竞争对手 | 奥杜本机 |
|---|---|---|---|---|
| Pull-based replenishment triggered by real consumption postings | ||||
| Electronic Kanban cards and loops as first-class BC records | ||||
| Two-bin / supermarket stocking with line-side bins | ||||
| Kanban sizing calculator (card count from consumption + lead time) | ||||
| Built and validated against your exact items, locations and bins | ||||
| Installed and supported on your tenant by the builder, with re-validation each BC release | ||||
| OData/REST API surface for MES, scanners and Power Platform |
关于Kanban & Lean Replenishment的常见问题
+Is this an instant AppSource download?
No. It is a build-to-order per-tenant AL extension. ECOSIRE develops it against your item master, locations and bin structure, then deploys the signed extension to your Business Central sandbox for UAT before promoting it to production. There is no instant marketplace install — that is deliberate, because Kanban loops only work when they reflect your real material flow.
+How long does delivery take?
Typical lead time is 2 to 4 weeks from kickoff, depending on the number of loops, your bin/location structure and how many replenishment sources (transfer, purchase, production) you use. We confirm a firm schedule after a short scoping call and a look at your current locations and items. Installation onto your environment and UAT are included in that window.
+What about ongoing support and updates?
The one-time build price includes deployment plus a warranty period for fixes after go-live. Because it is a per-tenant extension, we recompile and re-validate it against each Business Central monthly and major release so it stays compatible. Ongoing enhancements, new loops, or a support retainer are available as a separate agreement — you are never locked in, and source ownership terms are spelled out in the handover.
+Will this replace Business Central's MRP and planning?
No, and it shouldn't. Native planning stays in charge of forecast-driven procurement and end-item planning. This extension adds a pull-based execution layer for line-side replenishment that fires on consumption. The two coexist: MRP handles the push side, Kanban loops handle the floor-level pull.
+Can the floor scan card returns without opening Business Central?
Yes. The extension exposes loops, cards and signals through custom OData/REST API pages, so a scanner app, MES, or a Power Apps/Dataverse surface can confirm card returns and trigger replenishment. We can build a lightweight Power Apps shop-floor screen as an add-on if you want point-of-use scanning.
为什么客户信任 ECOSIRE
SOC 2 对齐
符合 GDPR
安全条纹支付
30 天退款
终身更新
LGPL-3.0 许可证
申请报价
Kanban & Lean Replenishment
A build-to-order AL extension that adds pull-based Kanban loops and lean material flow to Business Central, so line-side stock refills on real consumption signals instead of MRP pushes.
- Electronic Kanban cards with full lifecycle states (active, in-transit, returned, on-hold) stored in dedicated AL tables
- Kanban loop master linking item, supplying supermarket/supplier and consuming line-side bin
- Consumption-triggered replenishment via AL event subscribers on item, consumption and bin movement postings
- Configurable replenishment source per loop: transfer order, purchase order, or production order