产品详细信息以英文显示。翻译即将推出。
速览
- 价格
- $299.00 USD
- magento_2 版本
- —
- 设置时间
- 21分钟
- 许可证
- 一次永久
- 语言
- 11 语言
一次性购买
Barcode Pick & Pack Verification for Magento 2
A build-to-order Magento 2 extension that enforces barcode scanning at pick and pack so the wrong item physically cannot be shipped. Built, installed and supported by ECOSIRE on your store.
$299.00USD
现在无需付款。此操作会向我们的团队发送报价请求——我们会通过邮件跟进价格和后续步骤。
核心功能
Mandatory barcode scan at both pick and pack — an order line stays unverified until the scanned barcode matches the expected SKU, enforced via an observer on `sales_order_shipment_save_before`
Mobile/tablet warehouse-floor interface built on the Magento admin, optimized for handheld and Bluetooth scanners, gated behind a dedicated admin ACL resource
Picklist generation per order with configurable bin/location sort order to minimize walk paths
Batch (wave) picking — group multiple orders into one scan-verified pass for high-throughput fulfillment
Dedicated pack-verification station with a quality-control gate before the shipment and label are created
Offline-until-connected operation — scans queue locally and sync when connectivity returns, so dropped Wi-Fi never halts the line
SKU/barcode matching adapted to your scheme — EAN/UPC, internal SKU, or custom barcode map — configured during the build
Multi-Source Inventory (MSI) aware: verification respects the source the stock is allocated from
Full audit trail of who scanned what and when, persisted to a custom table exposed through service contracts
REST and GraphQL endpoints for verification state, so external WMS/3PL systems can read pick/pack status
Mismatch handling: blocks the pack, logs the exception, and surfaces a clear floor-level error instead of a silent wrong-ship
Admin configuration in Stores > Configuration for strictness level, scanner input mode, and per-store-view behavior
关于此产品
Barcode Pick & Pack Verification for Magento 2 closes the most expensive gap in high-volume fulfillment: the moment a picker grabs the wrong SKU and it ships anyway. This extension makes the barcode scan a hard requirement — an order line cannot be marked picked or packed until the scanned barcode matches the expected SKU, so mis-ships are blocked at the source instead of caught (or not) after dispatch.
为什么选择 Barcode Pick & Pack Verification for Magento 2
Mandatory barcode scan at both pick and pack — an order line stays unverified until the scanned barcode matches the expected SKU, enforced via an observer on `sales_order_shipment_save_before`
Mobile/tablet warehouse-floor interface built on the Magento admin, optimized for handheld and Bluetooth scanners, gated behind a dedicated admin ACL resource
Picklist generation per order with configurable bin/location sort order to minimize walk paths
Batch (wave) picking — group multiple orders into one scan-verified pass for high-throughput fulfillment
Dedicated pack-verification station with a quality-control gate before the shipment and label are created
Offline-until-connected operation — scans queue locally and sync when connectivity returns, so dropped Wi-Fi never halts the line
It ships as a proper Magento 2 module under app/code/Ecosire/PickPackVerification, wired through dependency injection (di.xml), service contracts, and observers on sales_order_shipment_save_before so verification state is enforced in the same flow that creates the shipment — not bolted on as a cosmetic UI. A mobile/tablet warehouse interface runs on the Magento backend with its own admin ACL resource, optimized for handheld scanners and gloved thumbs on the floor.
This is honestly build-to-order, not an instant Adobe Commerce Marketplace download. After purchase, ECOSIRE engineers build the module against your Magento version (Open Source or Adobe Commerce), your source-of-truth SKUs/barcodes, and your existing shipping and WMS workflow, then install it on your environment and support it. We adapt the matching logic to how your warehouse actually labels product — EAN/UPC, internal SKU, or a custom barcode scheme — and to multi-source inventory (MSI) if you run it.
The result is scan-enforced picklists, batch picking for wave fulfillment, a pack-station verification step with a quality-control gate, and offline-until-connected operation so a dropped Wi-Fi signal on the warehouse floor never stops the line. Everything is exposed through standard REST/GraphQL service contracts, so the verification state stays queryable and upgrade-safe.
你得到什么
- A custom Magento 2 module (`Ecosire/PickPackVerification`) built against your exact Magento Open Source or Adobe Commerce version
- Installation and configuration on your environment (staging first, then production) by ECOSIRE engineers
- SKU-to-barcode matching logic configured to your labeling scheme and warehouse workflow
- Admin ACL roles and the mobile/tablet pick-pack interface wired into your backend
- Database schema (declarative `db_schema.xml`) plus any data migration for existing open orders
- REST/GraphQL service contracts documented for your WMS/3PL or reporting integrations
- Handover documentation and a short floor-staff + admin walkthrough
- A defined post-launch support and bug-fix window (terms confirmed at order)
这是给谁的
High-volume fulfillment / warehouse manager
Runs a busy Magento warehouse where pick errors translate directly into returns, reships, and chargebacks. Wants the wrong item to be physically un-shippable, plus batch picking to keep throughput up during peaks.
Magento eCommerce operations lead
Owns the order-to-ship pipeline and is tired of reconciling mis-ship complaints. Needs scan-enforced accuracy that lives inside Magento's native shipment flow, not a disconnected spreadsheet or third tool.
3PL / multi-warehouse operator on Adobe Commerce
Fulfills for multiple brands or sources using Multi-Source Inventory and needs verification that respects which source stock came from, with REST/GraphQL hooks so their existing WMS can read pick/pack status.
安装概述
从ECOSIRE下载
在 ecosire.com 上购买许可证并从您的帐户仪表板下载 Barcode Pick & Pack Verification for Magento 2 模块 ZIP。
上传至Odoo
将 ZIP 解压到服务器上的 Odoo 自定义插件文件夹中（或通过“应用程序”>“从 Odoo.sh / runbot 上的文件安装”上传）。
安装模块
激活开发者模式，打开应用程序，单击更新应用程序列表，搜索 Barcode Pick & Pack Verification for Magento 2，然后按安装。
配置设置
打开新菜单，粘贴您的 ECOSIRE 许可证密钥，连接任何外部凭据（Shopify、Amazon、Stripe 等），然后保存。
验证并上线
运行内置连接测试，同步前 10 条记录，并安排定期 cron。如果出现任何问题，请联系支持人员。
Barcode Pick & Pack Verification for Magento 2 如何比较
| 标准 | 伊科西尔 | 定制建造 | 竞争对手 | 奥杜本机 |
|---|---|---|---|---|
| Mandatory scan blocks wrong-SKU ship at source | ||||
| Built for your exact SKU/barcode scheme and workflow | ||||
| Installed and supported on your store by the vendor | ||||
| Batch / wave picking for high volume | ||||
| Offline-until-connected floor operation | ||||
| REST/GraphQL service contracts for WMS/3PL integration | ||||
| Instant download, zero lead time | ||||
| Multi-Source Inventory (MSI) aware verification |
关于Barcode Pick & Pack Verification for Magento 2的常见问题
+How long does delivery take, since this is build-to-order?
After purchase we confirm your Magento version, barcode scheme, and warehouse workflow, then build, install on staging, and hand over. A typical build runs about 2 to 4 weeks depending on complexity (MSI, batch picking, WMS integration). We give you a firm timeline once we've reviewed your environment — this is a custom build installed on your store, not an instant Marketplace download.
+What ongoing support and updates are included?
Every build includes a defined post-launch support and bug-fix window (terms confirmed at order). Because the module is purpose-built for your store, we also handle compatibility fixes when you upgrade Magento or Adobe Commerce. Longer-term maintenance and feature additions are available as a separate agreement — you always own the source code we deliver.
+Does it work on both Magento Open Source and Adobe Commerce?
Yes. We build against whichever edition you run. On Adobe Commerce we account for the additional features you may use (B2B, advanced MSI reservations, staging). The core verification logic — observers, service contracts, ACL, the mobile interface — is identical; we tune the integration points to your edition and version.
+Will it conflict with my existing shipping, label, or WMS extensions?
The module hooks Magento's native shipment events and exposes state through service contracts, so it sits alongside shipping/label extensions rather than replacing them. During the build we review your installed modules and, where needed, use DI plugins/interceptors instead of class rewrites to avoid conflicts. If you already run a WMS, we expose REST/GraphQL endpoints so it can read verification status.
+What scanner hardware does it support, and what happens if Wi-Fi drops on the floor?
It works with standard USB/Bluetooth barcode scanners and camera-based scanning on tablets — anything that delivers the barcode as keyboard input or via the scan API we configure. The interface runs offline-until-connected: scans queue locally and sync when the connection returns, so a Wi-Fi dropout on the warehouse floor never stops picking or packing.
为什么客户信任 ECOSIRE
SOC 2 对齐
符合 GDPR
安全条纹支付
30 天退款
终身更新
LGPL-3.0 许可证
申请报价
Barcode Pick & Pack Verification for Magento 2
A build-to-order Magento 2 extension that enforces barcode scanning at pick and pack so the wrong item physically cannot be shipped. Built, installed and supported by ECOSIRE on your store.
- Mandatory barcode scan at both pick and pack — an order line stays unverified until the scanned barcode matches the expected SKU, enforced via an observer on `sales_order_shipment_save_before`
- Mobile/tablet warehouse-floor interface built on the Magento admin, optimized for handheld and Bluetooth scanners, gated behind a dedicated admin ACL resource
- Picklist generation per order with configurable bin/location sort order to minimize walk paths
- Batch (wave) picking — group multiple orders into one scan-verified pass for high-throughput fulfillment